The assistant runs the quoting conversation. Every check and every number comes from your rules — never from a guess. Watch the engine quote it.
Class I Div 1/2 enclosures, purge panels, and certs — area classification drives every option the engine allows.
Free to use — Nteli is paid only when an order is won through it.
The engine is a full MCP server — connect it to Claude and your team quotes Hazardous-Area Electrical in plain conversation, on a rule pack built from twenty years of configuring these products. Override the pack with your own rules, governed and audited — and you're onboarded.
Connect the engine as a custom connector (two steps, shown here), then paste any of these. They were run on the live engine; prices are illustrative until your price book loads.
What you’ll see: A drive's heat can't go in a sealed explosion-proof box — it quotes a Type X purge (NFPA 496) with automatic shutdown and a hazardous-location vortex cooler, and lists the purge-air and conduit-seal requirements.
What you’ll see: Terminals only in Division 2 don't need an explosion-proof enclosure: it quotes a 4X stainless box with seals (about $1,000) — and says why.
What you’ll see: Arcing contacts change the protection method: it moves to a listed cast explosion-proof enclosure with a breather/drain (about $3,600). Same location as the prompt above — the difference is what's inside, explained by code.
The four manufacturing levers · Estimate your leak ledger · The assumptions, explained · The Leak Ledger Workshop
One you quoted recently, names removed. You’ll get back what the engine produces — compare it with yours. No deck, no pitch.
Email an RFQ →