Cable assembly and wire harness quoting software compared: Cableteque, HarnessSuite, Zuken, Capital, aPriori, RapidHarness and Nteli
We sell one of the options below, so read this with that in mind. Every tool is described by what its vendor publicly documents, and we’re specific about where ours is the wrong choice.
The shortlist
| Option | Best fit when | What it documents | Watch for |
|---|---|---|---|
| Cableteque | You’re a wire harness or cable assembly contract manufacturer, from job shop to multi-site, and RFQs arrive as drawing packages. | Reads RFQ packages (PDF, scanned prints, TIFF, Excel, CSV, XML, native CAD exports); builds the BOM and from-to wire list; calculates wire lengths, tubes, tapes and coverings; a component library that records each connector’s mates, terminals, seals and tooling, and auto-picks them; prices at your contract rates and distributor offers; fills 60–80% of your labor template from your own time standards; quantity breaks and margins. Plans sized by assemblies quoted per month (up to 80, 150 or 300, plus enterprise); pricing by meeting. | Its public pages don’t state checks against an IPC/WHMA-A-620 class or wire gauge against current. Confirm in a demo what gets flagged versus auto-picked. |
| HarnessSuite | A harness manufacturer (aerospace, automotive and truck, defense, marine, off-road, EV, industrial, medical) that wants quoting, engineering and production in one cloud suite. | Material, labor and operation costs by costing method (standard, last purchase, contract or aggressive); copper-market and live supplier pricing; imports from Creo, Zuken, AutoCAD, CSV and PDF; re-prices open quotes when copper, component or labor costs change; margin guardrails; revision history. Its engineering module checks component selections for consistency. Flat-rate pricing with no per-transaction charges; no figures published. | Which compatibility checks run, and when, isn’t detailed publicly; no mention of IPC/WHMA-A-620. Pricing by demo. |
| Zuken Harness Builder for E3.series | You design harnesses in Zuken E3.series and want the quote, BOM and build documents to come from that design. | Parts list from the connectors, terminals, wires and cables placed in the design; a library that helps match wire sizing and terminal selection; cost and labor estimates from design data, with live pricing and availability from TrustedParts.com (2026 release); long-lead-time flags; quotation export; formboard and machine output. | Driven by E3.series project data, so the quote follows the design. Pricing by contact. |
| Siemens Capital Harness Costing LD | A costing team that already has harness data in KBL or HCV, the exchange formats common in automotive harness work. | Calculates assembly labor time, material quantities, costs and prices for a harness drawing; accounts for manufacturing system, plant location, exchange rates and component cost; results traceable to each work step; customer-specific assembly logic maintained on a server. | Needs harness data from upstream design. An enterprise costing system, not an RFQ desk tool. |
| aPriori | An OEM cost-engineering or sourcing team that outsources harnesses and wants a should-cost to check supplier quotes. | A wire harness costing module that breaks out wire and cable preparation, assembly on boards or jigs, and testing and labeling, from the BOM and design-tool tables. | Built for the buyer checking a quote, not for the shop writing one. |
| RapidHarness | You need to design and document harnesses: schematics, drawings, BOM and cut lists. | Harness CAD with a 95M+ part library (connectors, contacts, seals, backshells, terminals); BOM and wire and cable cut lists; a Rule Checker for common mistakes; bundle diameters and covering fit. Free individual tier; Standard $219/month, Professional $299/month; team plans $110 or $150 per user per month, billed annually. | No costing or quoting feature on its public pages. Its BOM and cut list feed whichever quoting method you use. |
| Spreadsheet | A shop with one experienced estimator and mostly repeat parts. | Whatever your estimator built. | The compatibility checks live in one person’s head. |
| Nteli | Customers describe the assembly in words or a short RFQ (cordsets, M12 to RJ45, MPO to LC breakouts, connector assemblies) and you want the build checked before the price goes out. | Describe the cable or paste the RFQ; the engine asks what narrows it, then checks connector against cable and gauge, jacket against environment and code, Ethernet category and connector coding against the data rate, fiber type and polarity, and wire gauge against current, each with its standard or catalog source. Combinations that can’t be built are refused with the reason and a priced way out. Prices from your rules, Good / Better / Best. Runs in ChatGPT or Claude as a connector, or in the web app. | Not harness CAD and not production software: no formboards or cut lists. The engine checks the configuration; it does not certify the assembly. Prices are illustrative until your price book loads. |
Summarised from each vendor’s public website, checked November 16, 2026; RapidHarness prices as shown on rapidharness.com/pricing that day. Verify current scope and pricing with the vendor.
The one distinction that matters
Every tool on this list can price a harness or cable assembly: material plus labor plus margin. The question is whether it checks the build before it prices it, or just prices the BOM it was given.
The checks are public knowledge, set by the standards and the connector makers’ own data:
- Workmanship class. IPC/WHMA-A-620 is the acceptance standard for cable and wire harness assemblies. It has three product classes, general (1), dedicated service (2) and high performance or harsh environment (3), and the customer specifies which applies. A stricter class means tighter acceptance criteria and more inspection, which is labor the quote should carry.
- Contact and wire. Each crimp contact or terminal is made for a range of wire gauges and insulation diameters, and needs the crimp tooling its maker specifies. A contact quoted onto a wire it can’t accept is an unbuildable line.
- Seals. Sealed connectors take wire within the seal’s insulation-diameter range. The right gauge with the wrong insulation still won’t seal.
- Connector and cable. Pole count, coding and contact rating have to match the cable and the job: an Ethernet run is only as fast as the connector coding allows, and a conductor has to be sized for the current it carries.
A tool that prices the BOM finds those problems at the bench or at inspection, after the PO, when the fix comes out of the margin you quoted. A tool that checks the build moves the discovery to the quote, when the fix is a different part number on the line.
A priced BOM is not a buildable assembly. The expensive mistake isn’t the missing label; it’s the contact that can’t take the wire.
The demo test
Bring one real RFQ, names removed, and ask each vendor to quote it live. Then check:
- Class. Leave the IPC/WHMA-A-620 class out. Does the tool ask, or quietly assume? Change it to Class 3: does the labor change?
- Contact and gauge. Specify a wire gauge outside the contact’s rated range. Is it flagged before pricing, or priced?
- Seal fit. On a sealed connector, give a wire whose insulation is outside the seal range. Does anything catch it?
- Data rate. Ask for 10 Gbit/s Ethernet on a connector coding that can’t carry it. Does the tool refuse and offer the alternative?
- Sources. Can it show the catalog page or the standard behind each check and each refusal?
- Completeness. Testing, labeling, documentation and certification lines all on the quote.
Any vendor, including us, should be able to run that on your RFQ. If your spreadsheet and your estimator pass all six, you may not need any of these tools.
Where Nteli is the wrong choice
- Your RFQs are large drawing packages with hundreds of circuits, and the work is extracting the BOM and wire list from prints. Cableteque is built for that.
- You need formboards, cut lists and production documents from the same system. HarnessSuite, Zuken Harness Builder or a harness CAD tool like RapidHarness covers that ground.
- You already design in E3.series or carry KBL/HCV data and want cost straight from it. Zuken Harness Builder or Siemens Capital Harness Costing will fit your data.
- You’re the OEM buyer checking what suppliers charge. aPriori is built for should-cost.
Where we fit: specialty manufacturers of cordsets, cable assemblies and connector assemblies that quote from requests and specs, where the costly errors are compatibility errors, and where those checks shouldn’t live in one estimator’s head. More on the product: cable assembly quoting software and wire harness quoting software; on what to look for: the cable assembly quoting guide. For control panels, see the UL 508A quoting software comparison.
Run the demo test on your own RFQ.
See the engine check and price a cable assembly, or book a demo and bring an RFQ you quoted recently, names removed.